|
-
UT130/UT150
- Digital Indicating Controllers
-
48x48
(1/16DIN) Controllers
-
1
Universal Input
-
2
Digital Ouputs (Alarm or Timer Outputs)
UT130/150
Specification Table
|
|
UT130
|
UT150
|
PV/SP
Data Display:
|
3
digits
|
4
digits / 4 digits
|
PV
Input:
|
1
universal input (TCs, RTDs)
|
1
universal input (TCs, RTDs, mV, V)
|
Indication
Accuracy:
|
2°C
+/- 1digit for TC
1°C +/- 1digit for RTD
|
2°C
+/- 1digit for TC
1°C +/- 1digit for RTD
0.3% +/- 1digit for mV/V input
|
Control
Scan Period:
|
500ms
|
Control
Loops and Mode:
|
1
loop, AUTO mode only
|
Number
of Setpoint (SP):
|
1
|
2
|
Control
Algorithm:
|
ON/OFF,
Time-proportional PID
Heating & Cooling
|
ON/OFF,
Time-proportional PID
Continuous PID, Heating & Cooling
|
SUPER,
Auto Tunings:
|
SUPER,
Dynamic AT
|
Control
Outputs:
|
Select
from Relay or Voltage Pulse
|
Select
from Relay or Voltage Pulse or 4 to 20 mA
|
PV
Retransmission Output:
|
Not
Available (NA)
|
1
point (4 to 20 mA)
|
Timer
Function:
|
Not
Available (NA)
|
Two
timers (0 to 99 min.59 sec.)
|
Digital
Inputs :
|
Not
Available (NA)
|
2
|
Digital
Outputs:
|
2
(Alarm or Timer Outputs)
|
RS485
Communicatiopn Protocols:
|
Two-wire,
MODBUS, PC-link, Ladder
|
Approvals:
|
General
= UL, CE, CSA / Front Protection = IP65
|
Other
Specifications:
|
Size=48*48*100mm,
Power Supply=90 to 264V AC, Power Consumption = 8
VA
|
Ambient
T, Limits RH:
|
0
to 50 °C, 20 to 90% RH
|
Model
and Suffix Codes
|
Model
|
Suffix
Code
|
Description
|
Notes
|
UT130
|
|
Temperature
Controller |
Note
1: "/AL" cannot be specified when specifying
"/HBA".
Note
2: "/HBA" and "/RS" cannot
be specified at the same time when selecting heating/cooling
type.
Note
3: Sensor of heater burnout alarm is CTL-6-S or
CTL-12-S36-8 (URD Co., Ltd., Japan). To be purchased
separately.
|
Output
Signal (for heating) Note 1
|
-R
|
Relay
contact output (for time-proportional PID or on/off
control) |
-V
|
Voltage
pulse output (for time-proportional PID) |
Ouput
Signal
(for cooling)
|
-N
|
No
cooling output (Standard Type) |
-R
|
Relay
contact output (for time-proportional PID) |
-V
|
Voltage
pulse output (for time-proportional PID) |
Options
|
/AL
|
Alarm
outputs (2 points) Note 1 |
/HBA
|
Heater
burnout alarm and 2 other alarm outputs (includes the
functions of /AL) Notes 1, 2, 3. |
/RS
|
Communication
function. Note 2 |
Model
and Suffix Codes
|
Model
|
Suffix
Code
|
Description
|
Notes
|
UT150
|
|
Temperature
Controller |
Note
1: "/HBA" cannot be specified when selecting,
"-A: 4 to 20 mA output".
Note
2: "/AL" cannot be specified when "/HBA"
is specified.
Note
3: "/HBA" and "/RET" cannot
be specified at the same time when selecting standard
type.
Note
4:
"/EX" and "/RS" cannot be specified
when selecting standard type.
Note
5:
"/RET" cannot be specified when selecting
heating/cooling type.
Note
6:
"/HBA" , "/EX" and "/RS"
cannot be specified at the same time when selecting
heating/cooling type.
Note
7:
Sensor of heater burnout alarm is CTL-6-S or CTL-12-S36-8
(URD Co., Ltd., Japan). To be purchased separately.
|
Output
Signal (for heating) Note 1
|
-R
|
Relay
contact output (for time-proportional PID or on/off
control) |
-V
|
Voltage
pulse output (for time-proportional PID) |
-A
|
4
to 20 mA output (for continuous PID) Note
1 |
Ouput
Signal
(for cooling)
|
-N
|
No
cooling output (Standard Type) |
-R
|
Relay
contact output (for time-proportional PID) |
-V
|
Voltage
pulse output (for time-proportional PID) |
-A
|
4
to 20 mA output (for continuous PID) |
Options
|
/AL
|
Alarm
outputs (2 points) Note 2 |
/HBA
|
Heater
burnout alarm and 2 other alarm outputs (includes the
functions of /AL) Notes 1, 2, 3, 6,
7 |
/EX
|
Switchover
between SP1 and SP2, and starting of timer by external
contacts. Notes 4, 6.
|
/RET
|
4
to 20 mA retransmission output of measured value (PV).
Notes 3, 5. |
/RS
|
Communication
function. Notes 4, 6. |
|
|
|