INDUSTRIAL THERMOCOUPLES
General Maintenance Parameters

THERMOCOUPLE DO's:

  • DO check in place.
  • DO replace at established, proper intervals.
  • DO have good connections throughout the circuit.

THERMOCOUPLE DO NOT's:
  • DON'T reinsert at different immersions. (Avoid decreasing the immersion).
  • DON'T use for accurate measurements at lower temperatures after being exposed to higher temperatures.
  • DON'T use in defective protecting tubes.
  • DON'T insulate with used insulators.
    If there is a reversal in the thermocouple circuit the indication will be down scale. A "double-reversal" in the circuit will give an upscale but erroneous reading. Keep the "Red" color coded leg negative throughout the circuit to avoid these reversals.


 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  ¿¬¶ôó:

Marlin º»»ç
T)1-216-676-1375
F)1-216-676-1344

Email: sales@pfkco.com


Çѱ¹ : ÇÇ¿¡ÇÁÄÉÀÌ(ÁÖ)
T) 031-202-4313
F) 031-202-4516

Email: sales@pfkco.com
   
       
 

 

ID PW